Improved Anti-Lift Design
Assembly Contains All Necessary Hardware to Complete the Installation With 3/8" or 1/2" (10 or 12 mm) Tempered Glass
Alloy 316 Steel Construction
The TAG Lag Sliding Series Glass Mount Single Slider Kit contains all the components you will need (except the tempered glass) to complete this style of installation. This model is used in applications where you are attaching a single sliding door in an 'all-glass' opening where you have a wall on one end next to the door, a glass transom above the door, and a fixed glass panel on the other side of the door. Bi-parting double doors are not possible for this application.
The Anti-Lift Sliding Door Top Rollers can be attached to the glass with either Surface Mount or Flush Mount Fittings (both are supplied). The Rollers have a 1/8" (3 mm) up or down vertical adjustment to aid in door alignment. This system should only be used with 3/8" or 1/2" (10 or 12 mm) tempered glass. Laminated glass cannot be used.
NOTE: Bi-parting double doors are not possible for this application.
DOOR SYSTEM LIMITATIONS:
Maximum Door Weight: 220 Lbs. (100 kg)
Minimum Door Width: 37-13/16" (960 mm)
Maximum Door Width: 53-9/16" (1.36 m)
Maximum Door Height: 98-7/16" (2.50 m)
Maximum Track Length: 104" (2.64 m)
VIEW OUR TEMPLATES:
This kit contains;
SLLAG1PIPE20PS: One Top Sliding tube with End Cap 104" (2.64m) in length
SLLAG4MOUNTPS: Six Glass Mount Clamp in SS304
SLLAG9WMECAPPS: One Top Sliding Tube
SLLAGCOM01PS: This set contains two rollers, one floor guide, one left and one right door stopper and two Top mount door stop
NOTE: Each items can be purchased separately.
This product hasn't received any reviews yet. Be the first to review this product!